Garmin GPSMAP 60Cx User Manual

Using Tracks
The Tracks feature creates an electronic bread crumb
trail or “track log” on the Map Page as you travel. The
track log contains information about points along its
path, including time, location, elevation, and depth
for each point (depth requires NMEA input, see pages
58 and 75).
The track log starts recording as soon as the unit gets
a location x. The percentage of memory used by the
current track log appears at the top of the Tracks Page.
After you clear the track log, it shows 0%.
Tracks Page
Percentage
of memory
used
List of
saved
tracks
To clear the track log:
1. Press MENU twice to open the Main Menu.
2. Select the Tracks icon, and press ENTER to
open the Tracks Page.
3. Highlight the Clear button, and press ENTER.
A conrmation message appears.
4. Highlight OK, and press ENTER.
To set up a track log:
1. Press MENU twice to open the Main Menu.
2. Select the Tracks icon, and press ENTER to
open the Tracks Page.
3. Highlight the Setup button, and press ENTER
to open the Track Log Setup Page.
Data Card Options
26 GPSMAP 60Cx Owner’s Manual
bAsIc oPerAtIon > usIng trAcKs

Garmin GPSMAP 60Cx Specifications

General

Outdoor (hiking, trekking)	Yes
Marine (chartplotters, sounders)	No
Routes quantity	50
Tracks quantity	10000
Number of waypoints	1000
Interface	serial, USB
GPS receiver	SiRFstar III
Supported protocols	NMEA 0183
Channels quantity	12 channels
GPS accuracy - position	10 m
GPS accuracy - velocity	0.05 m/s
Display resolution	160 x 240 pixels
Display size (HxV) (imperial)	2.7 \
Internal memory type	-
Battery type	AA
Battery life (max)	18 h
Battery technology	Alkaline
Number of batteries supported	2
Bundled software	MapSource Trip & Waypoint Manager
Operating temperature (T-T)	-15 - 70 °C

Weight and Dimensions

Depth	33 mm
Width	61 mm
Height	155 mm
Weight	213 g