Adjust the Picture
The TV picture may need a few adjustments after you turn it on. The
following steps will help you adjust the picture.
1. Turn COLOR and CONTRASTto the left asfar as they will go. This
will leave a dim black and white image on the screen.
2. TurnBRIGHT left or right until portions of the picture you knowto
be black appear black.
3. Turn CONTRASTto the right until the overall brightness isto your
preference.
4. Turn COLOR to the right until you reach a pleasing level of color
intensity.
5. Adjust TINT until fleshtones and other colors appear natural.
Use the TV as a Monitor
1. Connect an AudioNideo component (such as a Camcorder or VCR)
to the TV using the VIDEO IN/AUDIO IN jacks on the back of the TV.
Audi0Nideo cables are available from your local dealer or
electronics supply store.
2. Slide the TV/MONITOR switch to the MONITOR position.
3. Rotate VOLUME/POWER to the left to turn on power.
4. Turn on the Audio/Video component.
5, Adjust the picture if needed.
4
To Next Page
Loading...
Need help?
General
