To Next Page

To Previous Page

Handset Setup

There are ﬁve programmable menus available: Language,

Local Area Code, Ringer Tone, Tone/Pulse and Factory

Default. When you program these settings, make sure the

phone is OFF (not in talk mode). Pressing the TONE*/exit

button will remove you from the menu selection process

without changing the feature you are in.

Display Language

1. Press the ﬂash/program button until 1ENG 2FRA 3ESP

shows in the display.

2. Use the CID/vol (5 or 6) button or the handset

number pad to select 1 (English), 2 (French), or 3

(Spanish). The default setting is 1ENG.

3. Press the ﬂash/program button to conﬁrm and to

advance to the next menu feature.

Local Area Code

If you enter your local 3-digit area code in the area code

menu, your local area code does not display on the

Caller ID (CID) list. Instead, you only see the local 7-digit

number. Calls received from outside your local area code

will display the full 10-digit number.

1. Press the ﬂash/program button until AREA CODE - - -

shows in the display. The default setting is - - -.

GE 16 User Guide

Other manuals for GE 16