GE 164D3333P071 User Manual

Using the surface units.
Troubleshooting TipsInstallation Instructions Customer ServiceOperating InstructionsSafety Information
13
How to Set
Push the knob in and turn in either direction to the
setting you want.
At both
OFF and HI the control clicks into position. You
may hear slight
clicking sounds during cooking,
indicating the control is keeping the power level you set.
Be sure you turn the control knob to
OFF when you finish cooking.
Indicator Lights
A HOT COOKTOP indicator light will glow when any
radiant element is turned on, and will remain on until
the surface is cool enough to touch.
A surface unit ON indicator light will glow when any
surface unit is on.
NOTE: The surface unit ON indicator light may glow between the
surface control settings of LO and OFF, but there is no power to the
surface units.
Dual Surface Unit Switch (on some models)
To use the small (6 inch) surface unit, push in the
SMALL BURNER portion of the switch next to the
control knob.
To use the large (9 inch) surface unit, push in the
LARGE BURNER portion of the switch.
9"
6"
The right front surface unit has
2 cooking sizes to select from so you
can match the size of the unit to the
size of the cookware you are using.

GE 164D3333P071 Specifications

General

Brand	GE
Model	164D3333P071
Category	Ranges
Language	English