9
Caring For Your Mixer
EJECTING THE BEATERS OR DOUGH HOOKS
After you’ve finished mixing, turn the speed control dial to OFF and unplug the
electric cord from the electrical outlet. Push the ejector button located beside the
handle to remove beaters or dough hooks.
Scrape excess batter off the beaters using a rubber or plastic spatula. Do not strike
beaters on the rim of the bowl.
Cleaning Your Mixer
1. Always turn off and unplug Mixer from electrical outlet before ejecting the
attachments.
2. Wash attachments in hot, soapy water; rinse and dry.
3. Wipe the Mixer body and cord with a clean, damp cloth.
NOTES:
• Do not use abrasive cleaners or scouring pads as they may mar the finish of the Mixer.
• To reduce the risk of electrical shock, do not immerse the Mixer body or cord in
water or other liquid.
• Beaters and bowls may also be washed in an automatic dishwasher.
Storing Your Mixer
Store the Mixer in a dry location, such as on a countertop or table top, or in a closet
or cupboard. Insert the beaters into the proper sockets. Place the dough hooks in
the mixing bowl.
Store the bowl(s) on the turntable. The beaters will help hold the bowl in position.
To Next Page
Loading...
Need help?
General
