About the ice and water dispenser.
On some models
18
Operating Instructions
Installation Instructions
Safety InformationTroubleshooting TipsCustomer Service
■
Add ice before filling the glass with a beverage. This will prevent
splashing, which could cause the ice selector switch to stick or bind.
■ Do not add ice from trays or bags to the storage bin. It may not
crush or dispense well.
■ Avoid overfilling glass with ice and use of narrow or extra-tall
glasses. Backed-up ice can jam the chute or cause the door in the
chute to freeze shut. If ice is blocking the chute, poke it through
with a wooden spoon.
■ Beverages and foods should not be quick-chilled in the ice
storage bin. Cans, bottles or food packages in the storage bin
may cause the icemaker or auger to jam.
Crushed Ice.
Some crushed ice may be dispensed even though you
selected
ICE CUBES.
This happens occasionally when a few cubes
accidentally get directed to the crusher.
Sometimes a mound of snow will form on the door in the ice chute.
This condition is normal and usually occurs when you have dispensed
crushed ice repeatedly. The snow will eventually evaporate.
Water.
Press the dispenser pad for at least two minutes to remove
trapped air from the water line and to fill the water system.
To flush out impurities in the water line, throw away the first full
glass of water.
Dispensed water is not chilled. For colder water, add crushed ice or cubes before
dispensing water.
Important Facts About Your Dispenser
To Next Page
Loading...
Need help?
General
