GE 24 Owner's Manual

27
Troubleshooting TipsInstallation Instructions Customer ServiceOperating InstructionsSafety Information
Unplug the refrigerator.
Remove the shelf just below light shield.
Pull the light shield toward you to reach the bulb.
After replacing with an appliance bulb of the same or lower wattage, reinstall the
shield and shelf, and plug the refrigerator back in.
3
2
1
Freezer Compartment
Refreshment Center
(on some models)
Unplug the refrigerator.
Open fresh food compartment door, remove top
bin and raise refreshment center inner door.
Press sides of flexible light shield to release locking
tabs and allow the shield to swing down.
Unscrew burned-out bulb and replace it with an appliance bulb of
the same or lower wattage. Place rear tab of light shield into door
and rotate shield up until tabs lock into slots above. Plug refrigerator
back in.
3
2
1

GE 24 Specifications

General

Brand	GE
Model	24
Category	Refrigerator
Language	English