GE 24918 - Backlit Universal Remote User Manual

10
Using Your Remote
Code Identication
TheCodeIdenticationFeatureallowsyouto
identify the 4 digit library code stored under your
devicekey.Forexample,ifyouwanttondout
what 4 digit code is stored under your TV device
key, follow the six steps below:
1. Press and hold the
CODE SEARCH
button until the red indicator stays on.
Release the CODE SEARCH button.
2. Press and release the desired mode
button (TV, VCR, etc.). The red
indicator blinks, then stays lit.
3. Press and release the CODE
SEARCH button. The red indicator
blinks once and remains lit.
4. Tondtherstdigit
for the code stored
under the mode key
pressed in step 2,
press each numeric
key from 0-9 in turn.
The number that
causes the indicator
lighttoblinkistherst
digit in your code.
5. Tondtheseconddigit,repeatstep4,this
time when the red indicator blinks off this is the
second digit.
6. Repeatstep4tondthethirdandfourthdigits.

GE 24918 - Backlit Universal Remote Specifications

General

Brand	GE
Model	24918 - Backlit Universal Remote
Category	Universal Remote
Language	English