20
All Messages
You can also erase all the old messages only, leaving the new messages and Caller ID
information.
While the unit is in ready-to-answer mode, press and hold DELETE until the unit
announces, “Messages erased.”
• New messages can not be erased in this way. To erase new messages, play them
then press DELETE during play back.
Leaving a Memo
Use the MEMO button to record a specic message for others who have access to
the unit.
1. Press and hold the MEMO button. The unit announces, “Record your memo after
the tone.”
2. Record your message after the beep.
3. Release MEMO when you’re nished talking. The unit treats the memo as a
message, as the display shows.
Memory Full
When the unit’s memory is full, it answers after 10 rings and announces, “Memory
is full. No messages will be recorded.” A 20-second waiting period follows, allowing
you to enter your security code.
Remote Access
You can access your answerer from any touch-tone phone from another location
by entering your 3-digit security code (the default security code is 1 2 3, but you can
change it.) Be aware that remote functions do not work with rotary or push-button
pulse-dialing phones.
To access your answerer:
1. Call your telephone number.
2. After you hear the beep that follows the greeting, enter your 3-digit security code.
To Next Page
Loading...
Need help?
General
