Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
IT_ TURN ON THE WATER SUPPLY
Turnthe water on at the shutoff valve (housewater
supply)and check for any leaks,
IT_ PLUG IN THE REFRIGERATOR
Seethe grounding information attached to the power
cord,
LEVELTHEREFRIGERATOR
The leveling legs have 2 purposes:
1) Leveling legs adjust so the refrigerator is
firmly positioned on the floor and does not
wobble.
2) Leveling legs serve as a stabilizing brake
to hold the refrigerator securely in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
r_ Turn the leveling legs clockwise to raise
the refrigerator, counterclockwise to lower it.
Flat-Head Screwdriver
NOTICE:To avoid possible property
damage, the leveling legs must be firmly
touching the floor.
LEVELTHE REFRIGERATORDOORS
Remember a level refrigerator is necessary for
getting the doors perfectly even. If you need
help, review the previous section on leveling the
refrigerator.
When
the left
door is
lower than
the right
door,
When
the left
door is
higher
than
the right
door.
Adjustment
point
r_ if you open the freezer door, you can see
the center hinge.
r_ Insert 1/4" Allen wrench into the shaft of the
center hinge.
r_ Adjust the height by turning clockwise
or counterclockwise. When you turn
counterclockwise, the door will move up.
32
To Next Page
Loading...
Need help?
General