EasyManuals Logo
Home>GE>Dishwasher>GSD1230

GE GSD1230 Use And Care Guide

GE GSD1230
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
THE PROBLEM SOLVER
(continued)
PROBLEM
SPOTS AND
FILMING ON
GLASSES AND
FLATWARE
CLOUDINESS ON
GLASSWARE
CHIPPING OF CHINA
POSSIBLE CAUSE
Spotting can be caused by all these things:
Extremely hard water. (See How to Choose and Use Detergent section.)
Low inlet water temperature. (See How to Test Water Temperature section. )
Overloading the dishwasher.
Improper loading. (See Loading section. )
Old or damp powder detergent.
Phosphate level in detergent too low. (See How to Choose and Use
Detergent section.)
Rinse agent dispenser empty. (See How to Use a Rinse Agent section.)
Too
little detergent. (See How to Choose and Use Detergent section. )
Local water conditions and personal preferences vary. Try several brands of
detergents to find one that gives the best results for you. A liquid dishwasher
detergent may help reduce filming.
To remove stubborn spots and film from glassware:
1.
Remove all metal utensils from the dishwasher.
2. Do not add detergent.
3. Select POTSCRUBBER cycle.
4. Start the dishwasher and allow to run for 18 to 22 minutes. The dishwasher
will
now be in the main wash.
5. Then open the door and pour 2 cups (500 ml) of white vinegar into the bottom of
the dishwasher.
6. Close the door and allow to complete the cycle.
If vinegar rinse doesn’t work:
Repeat as above, except use 1/4 cup
(60 ml) of citric
acid crystals instead of vinegar. (Most drugstores carry citric acid crystals. If yours
doesn’t, call GE Factory Service.)
Using a vinegar or citric acid crystal rinse more than twice a month? Consider a home
water softener.
If vinegar or citric acid crystal rinse doesn’t work, the cloudiness is “etching.”
The film cannot be removed.
It can be prevented:
Use less detergent if you have soft water. Wash glassw~e in
the shortest cycle that
will
get them clean.
Water temperature entering dishwasher exceeds
150°F.
Rough handling can cause chipping. Load with care. Make sure glassware and china
are secure and can’t jar loose. (See Loading section.) Make sure tall glasses and
stemware will clear the top of the tub when you push the rack into the dishwasher.
Always use the top rack for delicate items.
14

Other manuals for GE GSD1230

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE GSD1230 and is the answer not in the manual?

GE GSD1230 Specifications

General IconGeneral
BrandGE
ModelGSD1230
CategoryDishwasher
LanguageEnglish

Related product manuals