GE GTH21 User Manual

Installation Instructions
TRANSFER DOOR STOPS
On each door, move the metal door stop from the right
to the left.
Move any screws from the left to the right.
5
Door Stop
Door Stop
Left Side
Right Side
REVERSING DOOR HANDLES –
TRANSFER FREEZER DOOR HANDLE
TO THE RIGHT SIDE OF THE
REFRIGERATOR DOOR (CONT.)
4. Insert the mounting screw into the surface
of the right side of the
refrigerator door with
a Phillips screwdriver.
5. Align the handle with
the mounting screw.
6. Push the handle down.
7. Secure the top end of
the handle by inserting
two screws and tightening
them with a Phillips
screwdriver.
NOTE: Do not over-tighten.
6
REVERSING DOOR
HANDLES – TRANSFER
FREEZER DOOR
HANDLE TO THE
RIGHT SIDE OF THE
REFRIGERATOR DOOR
1. Remove the two screws
securing the bottom end of
the handle with a Phillips
screwdriver.
2. Rotate the handle out and
lift off of the mounting
screw on the
freezer door.
3. Remove the
mounting screw
from the surface of
the freezer door.
6
23

GE GTH21 Specifications

General

Brand	GE
Model	GTH21
Category	Refrigerator
Language	English