Beforeyou call for service...
Troubleshooting Tips
Save time and money! Review the charts on the following pages
first and you may not need to call for service.
Surface units will not
maintain a rolling boil
or cooking is not
fast enough
Improper cookware
being used.
What ToDo
Use pans which are
absolutely fiat and match
the diameler of the SUl-fhce
unit selected.
Surface units do
not work properly
A fuse in your home
may be blown or the
circuit breaker tripped.
Replace fl_se or reset
circuit breaker.
Cooktop controls
improperly set.
Check to see file conecI
conuol is sel R)r tile surface
unit )xm are using.
tiny scratches
(may appear as
cracks) or abrasions
on radiant cooktop
glass surface
Incorrect cleaning
methods being used.
Cookware with rough
bottoms being used or
coarse particles (salt
or sand ) were between
the cookware and the
surface of the cooktop.
Cookware has been
slid across the cooktop
surface.
l Jse recommended
cleaning procedures.
lk_ sure cookware bolloms
and cookware are clean
befbre use. Use cookwme
_dfll smoofll botloms. Tiny
scralches are not removable
but _dll become less visible
in time as a resuh of
cleaning.
Areas of discoloration
on the cooktop
Improper cookware
being used.
Marks from ahmfinum and
copper pans as well as
mineral deposits flom water
or tbod can be removed
_dth the cleaning cretan.
Hotsugarmixtures
orplasticmelted
to thesurface
Hot cooktop came
into contact with
these substances.
_e file Cleaning the glass
cooktop section.
47
To Next Page
Loading...
Need help?
General
