10
Using Your Remote, cont.
Sleep Function
The Sleep button enables the remote to turn off
your TV after a period of 1 to 99 minutes as shown
below. The remote must be in TV mode to set a
Sleep Timer. This feature works even if your TV
does not have a sleep feature.
1. Press and release the TV device but
-
ton.
2. Press and hold the Sleep button until the
onds).
3. Release the Sleep
button.
4. Press and release
the numeric buttons
(01-99) for the time
required. The LED will
blink off to indicate button press acceptance.
5. TV Sleep Timer is set.
6. Leave the Remote pointing towards the TV
with an unobstructed path.
To cancel the Sleep Timer, press and hold the
Sleep button until the LED blinks, or press and
LED remains lit (about 2-3 sec-
To Next Page
Loading...
Need help?
General
