GE RM84911 User Manual

8
Using Your Remote
Code Identication
TheCodeIdenticationFeatureallowsyouto
identify the four digit library code stored under your
devicebutton.Forexample,ifyouwanttondout
what four digit code is stored under your TV device
button, follow the six steps below:
1. Press and hold the
SETUP button until
the red indicator stays on. Release the
SETUP button.
2. Press and release the desired
device button (TV, VCR, etc.). The
red indicator blinks, then stays lit.
3. Press and release the
SETUP button.
The red indicator blinks once and
remains lit.
4. Tondtherstdigit
for the code stored
under the device
button pressed in step
2, press each numeric
button from 0-9 in
turn. The number that
causes the indicator
lighttoblinkistherst
digit in your code.
5. Tondtheseconddigit,repeatstep4.
6. Repeatstep4tondthethirdandfourthdigit.
This time the red indicator turns off and stays

GE RM84911 Specifications

General

Brand	GE
Model	RM84911
Category	Universal Remote
Language	English