A
r
●
●
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
OVEN WILL NOT COME
ON
CONTROL PANEL
LIGHTED.YET OVEN
WILL NOT
STAR:
“PRObE” APPEARS
ON DISPLAY
POSSIBLE CAUSE
●
A
fuse
in
yaur
home may be blown or tie circuit breaker tripped. Replace fuse
or
reset
circuit breaker.
●
Unplug your microwave oven, then plug it back
in.
●
M&e
sure 3-prong plug on oven is fully inserted into
wdl
receptacle.
●
Door not securely closed.
●
START pad must be touched after entering cooking selection.
●
Another selection entered already in oven and
CLEAWO~
pad not touched
to cancel
it.
●
Make sure you have entered cooking time after touching TIME
COOK
I
& II
pad.
●
CLEANOW
pad was touched accidentily. Reset cooking program and touch
STMT
pad.
●
Make sure you have entered a temperature after touching
TEMP
COOK& HOLD
pad.
●
MAe sure you have entered a code number after touching AUTO
DE~OST
or
CODE
RE~AT.
●
Probe has been forgotten or not seated properly in oven
wdl
when using
Temp
Cook & Hold function.
All these things are normal with your microwave oven:
● Steam or vapor escaping from
● Dimming oven light and change
●
Some TV-Radio interference
around the
door.
in blower sound may occur while
might
be noticed while using your
● Light reflection around door or
operating at power
ievels
other
mi=rowave
oven. It’s
simil~
to the
outer case.
than high.
interference caused by other small
● Dull thumping sound while oven
appliances and does not indicate a
is operating.
problem with your oven.
If
you
need more help...call, toll free: GE Answer Center
@
/ 800.626.2000/ consumer information service
34
To Next Page
Loading...
Need help?
General
