EasyManuals Logo
Home>GE>UPS>VH Series 2000

GE VH Series 2000 User Manual

GE VH Series 2000
24 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
modifications reserved
OPM_VHE_XXX_0K7_3K0_XGB_V010
23 User manual VH Series 700-3000 UPS 1.0 (GB)
9 - Specifications
VH Series : 700 1000 1500 2000 3000
Ratings
Voltage Amperes (VA) with computer type load : 700 1000 1500 2000 3000
Watts (W) with resistive load : 490 700 1050 1400 2100
Input thermal circuit breaker (A) : 7 7 8 10 16
Internal input fuse 250V, slow (A) : 8 8 10 16 20
Input converter
AC input voltage : 220 - 240 V
AC input voltage range : 100% load: 160 - 280 V
70% load: 130 - 280 V
input >280 Vac: UPS switches to battery operation
Minimum start-up AC voltage : 170 V (at any load)
Input current waveform : sinusoidal, conform or better than EN 61000-3-2 (IEC 555-2)
Input current (A) at nom. inp. volt. : 3.0 4.4 6.4 8.8 11.1
Input power factor : 1
Input frequency range : 45 - 66 Hz
Inrush current : none
Output converter
AC output voltage : 220 / 230 / 240 V (selectable)
AC output voltage tolerance : ± 2%
Output frequency : 50 or 60 Hz, front selectable
Output frequency range : nominal ± 0.15% unless synchronized to the mains
Output waveform : sine wave
Harmonic distortion : < 2% (typical 1%) with linear load
Power factor : 0.7
Crest factor (peak to RMS current) : suitable for loads with c.f. up to 6:1
Capacity appliance outlets : max. 10 A per outlet (one 16A outlet on VH Series 3000 VA)
Bypass
AC input voltage range : selected output voltage +15% -10%
Frequency tracking rate : 2 Hz/sec.
Frequency tracking range : nominal ± 10%
Phase difference : < 7º
Typical transfer time, msec : 1
Overload capability : fully protected against overload and short circuits
Overload behaviour during battery operation : 110% during 5 minutes
: 150% during 5 seconds
Overload behaviour during bypass operation : depends on rating of thermal circuit breaker
typical: 125% of TCB value for 200 seconds
200% of TCB value for 10 seconds
300% of TCB value for 4 seconds
Batteries (ratings given for 25ºC)
Nominal voltage (Vdc) : 36 36 36 72 72
Number / Ah batteries : 3 / 7 3 / 7 3 / 9 6 / 7 6 / 9
Type : sealed lead acid, maintenance free
Service life : up to 6 years (depending on use)
Recharge current : 1.7 A
Battery recharge time
(batt. discharged at 100% load) : 1.5 hours for 90% capacity, std battery
Runtime in minutes
at typical load (75%) : 16 11 8 11 8
VA/Watts
100/70 : 120 120 180 >180 >180
300/210 : 32 32 40 60 75
700/490 : 13 13 16 30 35
1000/700 : - 8 10 20 20
1500/1050 : - - 6 11 16
2000/1400 : - - - 8 10
3000/2100 : - - - - 6
General
Weight UPS (kg) : 18.3 18.3 19.3 31.1 33.1
Dimensions UPS (hxwxd, tower orientation) : 440x87x472mm 440x87x547mm
Weight 14Ah battery pack 36Vdc / 72V (kg) : 29 / 47
Dims batt pack 36Vdc/72Vdc (hxwxd, tower orientation) : 440x87x472mm / 440x87x547mm
Enclosure / protection : steel-plastic / IP20
Environment
Safety : EN 62040-1-1 (EN 60950)
Electromagnetic compatibility : EN 62040-2
Ambient temperature : -10 to +40ºC
Audible noise at 1 meter : < 45 dB(A), load and temperature dependent
Max. relative humidity : 95% (non-condensing)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE VH Series 2000 and is the answer not in the manual?

GE VH Series 2000 Specifications

General IconGeneral
BrandGE
ModelVH Series 2000
CategoryUPS
LanguageEnglish

Related product manuals