20
Your alarm specialist may have
programmed your system to be
monitored by a central station. The
built-in digital communicator can
transmit emergency signals and
status reports to the central station
24 hours a day.
Communicator Features
Abort Delay. Ask your installer
which of your zones have abort
delay, a delay that enables you to
reset the system before it
communicates to the central station.
Regular Burglary (Non-24-Hour)
Zone. Reports are aborted by
disarming within the delay period.
24-Hour Zones and zones
programmed to report restores must
be restored first, then the panel
armed and disarmed, all within the
delay period.
Opening and/or Closing
Reporting. Your system can notify
the central station every time it is
disarmed or armed. Any or all of up
to 96 different users can each be
identified. If your system reports on
arming (Closing Report), the central
station will acknowledge arming.
This will signal at the keypad as a
“ringback” beep. Note: If the
ringback signal is not heard, call for
service.
CENTRAL STATION MONITORING
To Next Page
Loading...
Need help?
General
