EC Declaration of Conformity
This is to certify that Genelec Monitoring Systems 8040A and 8050A conform to the following standards:
Safety:
EN 60065 / IEC 60065:1998 6th Edition
EMC:
EN 55013: (2001)
EN 55020: (1994), A11: (1996), A12: (1999), A13: (1999), A14: (1999)
EN 61000-3-2 (2000)
EN 61000-3-3 (1995)
The product herewith complies with the requirements of The Low Voltage Directive73/23/EEC, EMC Directive 89/336/EEC
and 93/68/EEC
Signed:
Ilpo Martikainen
Position: Managing Director
Date: 20-April-2004
Guarantee
Genelec 8040A and 8050A are supplied with
one year guarantee against manufacturing
faults or defects that might alter the perform-
ance of the loudspeakers. Refer to supplier
for full sales and guarantee terms.
Figure 8. The curves above show the effect of the “bass tilt”,
“treble tilt”, “desktop low frequency” and “bass roll-off” controls
on the free field response of the 8040A.
Figure 9. The upper curve group shows the horizontal directivity
characteristics of the 8040A measured at 1 m. The lower curve shows
the system's power response.
Figure 10. The curves above show the effect of the “bass tilt”,
“treble tilt”, “desktop low frequency” and “bass roll-off” controls
on the free field response of the 8050A
Figure 11. The upper curve group shows the horizontal directivity
characteristics of the 8050A measured at 1 m. The lower curve shows
the system's power response.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
