EasyManuals Logo
Home>Generac Power Systems>Portable Generator>MAGNUM MMG75D

Generac Power Systems MAGNUM MMG75D Owner's Manual

Generac Power Systems MAGNUM MMG75D
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Owner’s Manual for Generator 1
Introduction and Safety
Section 1 Introduction and Safety
Introduction
Thank you for purchasing a Generac Mobile Products
LLC product. This unit has been designed to provide
high-performance, efficient operation, and years of use
when maintained properly.
If any section of the manual is not understood, contact
your nearest Independent Authorized Service Dealer
(IASD), or contact Generac Mobile Products (GMP)
Customer Service at
1-800-926-9768, or
www.generacmobileproducts.com with any questions
or concerns.
The owner is responsible for proper maintenance and
safe use of the equipment. Before installing, operating, or
servicing this generator:
Save these instructions for future reference. This manual
contains important instructions for the generator that
should be followed during installation, operation and
maintenance of the generator and batteries. ALWAYS
supply this manual to any individual that will use this
machine.
The information contained herein was based on
machines in production at the time of publication.
Generac reserves the right to modify this manual at any
time.
Safety Rules
The manufacturer cannot anticipate every possible
circumstance that might involve a hazard. The warnings
in this manual, and on tags and decals affixed to the unit
are, therefore, not all inclusive. If using a procedure, work
method or operating technique that the manufacturer
does not specifically recommend, verify that it is safe for
others. Also make sure the procedure, work method or
operating technique utilized does not render the
equipment unsafe.
Throughout this publication, and on tags and decals
affixed to the unit, DANGER, WARNING, CAUTION and
NOTE blocks are used to alert personnel to special
instructions about a particular operation that may be
hazardous if performed incorrectly or carelessly. Observe
them carefully. Their definitions are as follows:
NOTE: Notes contain additional information important to
a procedure and will be found within the regular text of
this manual.
These safety warnings cannot eliminate the hazards that
they indicate. Common sense and strict compliance with
the special instructions while performing the action or
service are essential to preventing accidents.
(000100a)
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
(000001)
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
(000002)
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
(000003)
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.

Table of Contents

Other manuals for Generac Power Systems MAGNUM MMG75D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Generac Power Systems MAGNUM MMG75D and is the answer not in the manual?

Generac Power Systems MAGNUM MMG75D Specifications

General IconGeneral
BrandGenerac Power Systems
ModelMAGNUM MMG75D
CategoryPortable Generator
LanguageEnglish

Related product manuals