5
SAFETY INSTRUCTIONS
Please read these instructions before installing or operating the XM Series UPS to prevent personal
injury or damage to the XM Series UPS.
GENERAL
Installation and wiring compliance
- Installation and wiring must comply with the electrical codes and must be done by a certified
electrician.
Preventing electrical shock
- Always connect the grounding connection on the appropriate grounding system.
- Disassembly / repair should be carried out by qualified personnel only.
- Disconnect all AC and DC side connections before working on any circuits associated
with the XM Series UPS. Turning the on/off switch on the XM Series UPS to off position
may not entirely remove dangerous voltages
Installation environment
- The UPS should be installed indoor only in a well ventilated, cool, dry environment.
- Do not expose to moisture, rain, snow or liquids of any type.
- To reduce the risk of overheating and fire, do not obstruct the suction and discharge
openings of the cooling fans.
- To ensure proper ventilation, do not install in a low clearance compartments.
To Next Page
Loading...
General