Gerber Technology GERBERplotter XLp50 User Manual

________________________________________________
10
English
7. Place the Head Unit on top of the two side columns. Screw in
the left and right screws to attach (Figure 9). Repeat on the
opposite side.
Figure 9. Two screws attaching Head Unit and Crossbeam
Key to Figure
1. Screws
8. On the interior of the Right Side Column, remove the Feed
Motor Cable from the plastic holder and plug port located
inside the Right Side Column (Figure 10).
Figure 10. Feed Motor Cable inside the Right Side Column

Gerber Technology GERBERplotter XLp50 Specifications

General

Brand	Gerber Technology
Model	GERBERplotter XLp50
Category	Printer
Language	English