Gigabyte GA-EP45C-DS3 - Product Specifications

GA-EP45C-DS3R/DS3 Motherboard - 10 -
1-2 Product Specifications
CPU  Support for an Intel
®
Core
TM
2 Extreme processor/
Intel
®
Core
TM
2 Quad processor/Intel
®
Core
TM
2 Duo processor/
Intel
®
Pentium
®
Dual-Core processor/Intel
®
Celeron
®
processor
in the LGA 775 package
(Go to GIGABYTE's website for the latest CPU support list.)
 L2 cache varies with CPU
Front Side Bus  1600/1333/1066/800 MHz FSB
Chipset  North Bridge: Intel
®
P45 Express Chipset
 South Bridge: Intel
®
ICH10R / ICH10
Memory DDR3:
 2 x 1.5V DDR3 DIMM sockets supporting up to 4 GB of system memory
 Dual channel memory architecture
 Support for DDR3 1600/13331066/800 MHz memory modules
DDR2:
 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory
(Note 1)
 Dual channel memory architecture
 Support for DDR2 1066/800/667 MHz memory modules
(Note: Mixed mode, populating DDR2 and DDR3 memory modules simulta-
neously is not supported. Go to GIGABYTE's website for the latest memory
support list.)
Audio  Realtek ALC889A codec
 High Definition Audio
 2/4/5.1/7.1-channel
 Support for Dolby
®
Home Theater
(Note 2)
 Support for S/PDIF In/Out
 Support for CD In
LAN  2 x Realtek 8111C chips (10/100/1000 Mbit)
 Support for Teaming
Expansion Slots  1 x PCI Express x16 slot
(Note 3)
 1 x PCI Express x8 slot
(The PCIEX16_1 and PCIEX8_1 slots support ATI CrossFireX
TM
technology
and conform to PCI Express 2.0 standard.)
 3 x PCI Express x1 slots
 2 x PCI slots
Storage Interface  South Bridge:
- 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5 and RAID 10
 JMicron 368 chip:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
 iTE IT8718 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
Only for GA-EP45C-DS3R.
Only for GA-EP45C-DS3.