- 39 - BIOS Setup
English
2-5 Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
` Serial-ATA RAID Config [Press Enter]
On-Chip IDE Channel0 [Enabled]
IDE DMA transfer access [Enabled]
NV Serial-ATA 1 [Enabled]
IDE Prefetch Mode [Enabled]
USB Memory Type [SHADOW]
Onchip SATA Mode [IDE]
Onboard Audio Function [Auto]
Onboard LAN Control [Enabled]
` SMART LAN [Press Enter]
OnBoard LAN Boot ROM [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
On-Chip USB [V1.1+V2.0]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Legacy USB storage detect [Enabled]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
Serial-ATA RAID Config
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Serial-ATA RAID Config
Item Help
Menu Level`
x NV SATA Pri-Master RAID Enabled
x NV SATA Pri-Slave RAID Enabled
x NV SATA Sec-Master RAID Enabled
x NV SATA Sec-Slave RAID Enabled
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults