To Next Page

To Previous Page

BIOS Setup - 36 -

2-1 Startup Screen

The following screens may appear when the computer boots.

A. The LOGO Screen (Default)

B. The POST Screen

Function Keys:

<TAB>: POST SCREEN

Press the <Tab> key to show the BIOS POST screen. To show the BIOS POST screen at system start-

up, refer to the instructions on the Full Screen LOGO Show item on page 49.

<DEL>: BIOS SETUP\Q-FLASH

Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.

<F9>: XPRESS RECOVERY2

If you have ever entered Xpress Recovery2 to back up hard drive data using the driver disk, the <F9>

key can be used for subsequent access to Xpress Recovery2 during the POST. For more information,

refer to Chapter 4, "Xpress Recovery2."

<F12>: BOOT MENU

Boot Menu allows you to set the rst boot device without entering BIOS Setup. In Boot Menu, use the up

arrow key <

> or the down arrow key <

> to select the rst boot device, then press <Enter> to accept.

To exit Boot Menu, press <Esc>. The system will directly boot from the device congured in Boot Menu.

Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order

will still be based on BIOS Setup settings. You can access Boot Menu again to change the rst boot de-

vice setting as needed.

<END>: Q-FLASH

Press the <End> key to access the Q-Flash utility directly without having to enter BIOS Setup rst.

Function Keys

Motherboard Model

BIOS Version

Award Modular BIOS v6.00PG, An Energy Star Ally

GA-MA790GPT-UD3H F1b

<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qash

06/19/2009-RS780D-SB750-7A66AG0EC-00

Function Keys

Gigabyte GA-MA790GPT-UD3H User Manual

Questions and Answers: