Gigabyte M27F User Manual

- 44 -
Gaming Monitor User Guide
Troubleshooting
Problem Possible Solution(s)
No power • Make sure the power cable is properly
connected to the power source and the
monitor.
• Check the cable and plug to make sure they
are not broken.
• Make sure the monitor is turned on.
No image appears
on the screen
• Make sure the monitor and the computer
are properly connected and both devices are
turned on.
• Make sure you have selected the correct
input source. Refer to page 24 or 37.
• Adjust the Brightness and Contrast settings.
Refer to page 35.
The image does
not ll the entire
screen
• Try dierent Display Mode (aspect ratio)
setting. Refer to page 34.
The colors are
distorted
• Make sure the input signal cable is properly
connected.
• Congure the image related settings. Refer to
the “Picture” section.
No sound or
volume is low
• Make sure the headphone cable is properly
connected.
• Adjust the volume level. Refer to page 26
or 38.
• Adjust your computer sound related settings.
Note: If the problem persists, please contact our customer service for further
assistance.

Gigabyte M27F Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Webcam	no
OS Compatibility	apple ios, windows, not applicable, mac
Screen Size	27 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Refresh Rate	144hz
Response Time	1 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	1000:1
Synchronization	freesync premium (amd adaptive sync)
HDR	yes
Built-In Speakers	no
Interface Connectors	1 x displayport 1.2, 2 x hdmi
HDMI Ports	2
USB Ports	2 x usb-a 3.0, 1 x usb-c 3.0
USB Type B Ports	1
Display Port Inputs	1
Headphones Output	yes
Width with Stand	24.2 inches
Net Weight without Stand	13 pounds