GLOBBER E-MOTION 14 User Manual

10
ENGLISH
• Check that the kick stand is fully folded before starting. When parking, check that the kickstand is properly unfolded; the unit must
beparkedonaatgroundtoavoidanyriskoffalling.Iftheunitisnotequippedwithakickstand,groundparkingisrecommended,
ensuringyoudonotinterferewiththetrafc.
• Itishighlyrecommendedtowearreectiveclothingandaccessoriestoenhance/increaseitsvisibility.
• When the product is no longer in use, it should be stored in a safe place or put under protection (lock system) to prevent
unauthorized use of commands/product.
• Vibrationandshock:Usinganelectricscootercangeneratesignicantvibrationsandshocks,dependingonofthesurfaceon
which it is used. Do not use your scooter for too long, and immediately stop using if discomfort caused by vibrations. The total
hand-arm vibration value does not exceed 2.5m/s
2
.
• In case of fall or accident, always check that product is switched off and clear the way for other users if possible.
• The front suspension in steering column absorbs vibration.
• The materials used for the construction of the machine, are not toxic, and have been analysed according to the following directive:
2011/65/EU Rohs. A safety data sheet has also been established for the battery.
• The safety and reliability of the control systems have been evaluated according to the following guidelines: 2014/30/EU
Electromagnetic Compatibility Directive and 2014/35/EU Low Voltage Directive.
• In France this product is equipped to circulate on certain public roads, for the users of at least 12 years old. Consult the website:
service public.fr/particuliers/vosdroits/F308.
• In France, it is the responsibility of users of a motorized mobility device (EDP) to insure. Motorized EDPs may be included in home
multi-riskinsurancecontractsbutwithaspeciccivilliabilityclauseofthelandmotorvehicles(VTM)type,orbethesubjectofa
specicEDPmotorizedcontract.
• Toavoidpinchingandentrapment,donotgetyourngersstickinmovingparts.
7 – MAINTENANCE
• Warning. As with any mechanical component, your vehicle is subject to high stresses and wear. The various materials and
components may react differently to wear or fatigue. If the expected service life for a component has been exceeded, it may break
suddenly, thereby risking causing injuries to the user. Cracks, scratches, and discoloration in the areas subject to high stresses
indicate that the component has exceeded its service life and should be replaced.
• Caution:Therearwheelhasamotorisedpart.Ifyouwishtocheckthemotorizedpartsorchangeit,contactaqualiedtechnician
or a Globber representative at contact@globber.com.
• Eliminate the sharp edges generated by the use.
• Do not modify or transform the vehicle, including the steering tube and sleeve, stem, folding mechanism and rear brake. or the
warranty will be invalidated.
• The accessories and any additional items which are not approved by the manufacturer shall not be used.
• To cle an : D is con ne ct th e c ha rge r and t urn o ff the p rod uc t, wi pe it wi th a dr y c lo th.
• The lithium battery: To guarantee the battery lifetime, charge it when its level is low. If it is not used for a long period of time, you
areadvisedtochargeitonceamonth.Ifyouwishtocheckthebatteryorchangeit,contactaqualiedtechnicianoraGlobber
representative at contact@globber.com.
• The recommended storage temperature for the battery is between 5°C and 30°C.
• Do not use or place the electric scooter in an environment where the temperature exceeds 40°C to avoid any lithium battery
malfunctionthatmayleadtoitcatchingre.
• Never store the electric scooter in a car during hot weather to avoid any danger of this.
• Bearings: Avoid riding through water, oil, or sand, which would damage your bearings. To maintain your bearings, check regularly
thatthefrontwheelturnsproperlybyturningtheelectricscooterupsidedownandpushingthewheelwithyourngers.Ifthe
front wheel does not turn, remove it and check the condition of the bearings. First unscrew the wheel axle. Remove the axle and
remove the wheel. Carefully push the two bearings out of their seating. If they are chipped or crushed, buy new ones. If there is no
visible damage, oil them. To do so, remove any traces of grease, mud, or dust from the bearing using a paper towel or a cloth then
grease them either with a self-lubricating spray or by soaking them in oil overnight (turn the bearings several times in the oil before
leavingthemtosoak).Retthebearingsandaxle,thenthefrontwheel.
• The wheels: The wheels wear out ove a certain length of time or may even develop holes if the scooter is used on rough surfaces
too often. This is particularly true of the rear wheel on which the brake is applied. Check them regularly and have them changed for
better safety.
• Productmodications:Theoriginalproductmustbynomeansbemodiedexceptforthemaintenance-relatedchangesmentioned
in these instructions.
• Nuts, axles and other self-locking fasteners: These should also be checked regularly. They can become loose after a while in
which case they should be tightened. They can become worn and not tighten properly, in which case they should be replaced.

GLOBBER E-MOTION 14 Specifications

General

Brand	GLOBBER
Model	E-MOTION 14
Category	Scooter
Language	English