Technology for safety
10
D1000 series - Intrinsically Safe Isolators
PPC 1090 Pocket Portable Configurator
The PPC1090 is a small and handy Pocket Portable Configurator suitable to program configuration parameters of D1000 series modules like:
type of input Sensors, input and output Ranges, Burnout conditions, High/Low Alarm mode, Relay NE/ND, Alarm Trip Point, Hysteresis value and
ON/OFF Alarm delays. The Configurator is powered by the unit and can be plugged in without disconnecting the module.
Refer to specific module Instruction Manual for details on using the PPC1090
PPC 1092 Serial Adapter
The PPC1092 adapter is needed to interface the PC with D1000 Series modules for a complete configuration of Input, Output and Alarm
parameters. The package includes necessary cables and a USB to RS-232 Adapter; a CD-Rom with the SWC1090 Software is also provided.
The SWC1090 can also be downloaded from our website.
D1000 Series Configuration
The Pocket Portable Configurator type PPC1090 or PPC1092 is suitable to configure the “smart” barrier of D1000 series.
The PPC1090/PPC1092 unit is not ATEX, UL or FM approved and is only to be used in Safe Area/Non Hazardous Locations and prior to installation
of the isolator and prior to connection of any I.S. wiring. Do not use PPC1090/PPC1092 configurator in Hazardous Area/Hazardous Locations.
The PPC1090 configurator is powered by the unit (no battery power) when the telephone jack is plugged into the barrier (RJ12 6 poles connector
type with 1:1 connection). It has a 5 digit display, 4 leds and four push buttons with a menu driven configuration software and can be used in
Safe Area/Non Hazardous Locations without any certification because it plugs into the non intrinsically safe portion of circuit. The PPC1092 adapter
permits the configuration of the unit via a PC software program and acts as an interface for RS232 serial line and D1000 unit; it can be used in
Safe Area/Non Hazardous Locations without any certification because it plugs into the non intrinsically safe portion of circuit.
The main features of the converter can be easily configured, these are: type of input circuit, type of sensor, burnout operation, measuring range,
type of output and range, refer to the next section of Instruction Manual for a detailed description of configuration and menu options.
To Next Page
Loading...
Need help?
General
