Go Power GP-RVC-MPPT-30 User Manual

[page 14] | gpelectric.com
9.1 LED IDENTIFICATION
9.2 PV INDICATOR 1
LED PATTERN STATUS
O󰀨 Night time
Double ash Day time
Single Flash No PV input
Steady On MPPT charging
Fast Flash Absorption or Equalize
Slow Flash Float Charging
9.3 BATTERY INDICATOR 2 3
LED PATTERN STATUS
Single Flash No Battery
Fast Flash Battery over voltage
Slow Flash Battery over discharged
Steady On Battery status is ok
1 2 3
1 2
9. LED INDICATORS

Go Power GP-RVC-MPPT-30 Specifications

General

Battery Voltage Range	8V – 32V
Battery Type	Lead Acid (AGM, GEL, Flooded), LiFePO4
Max Charge Current	30A
Conversion Efficiency	≤98%
MPPT Tracking Efficiency	>99%
No-Load Loss	<10mA
Max Panel Input Voltage	100Voc
Max PV Power Input	600W@12V / 1200W@24V
Grounding	Negative
Protection	Solar/battery reverse polarity Solar/battery over voltage Solar/battery short circuit Over temperature
Operating Temperature	-35 to 45°C
Storage Temperature	-35 to 75°C
Humidity	95% N.C.
Water Ingress Protection	IP32
Altitude	< 3000m
Max Wire Gauge	8 AWG

Weight and Dimensions

Dimensions (H x W x D)	3.15” x 7.78” x 5.5”
Weight	3.14lbs (1.42kg)