Go Power GP-RVC-MPPT-30 User Manual

Congratulations on purchasing your Go Power! GP-RVC-30-MPPT Solar Controller!
Record the unit’s model and serial number below. It is much easier and quicker to record this information now at the pre-installation
stage.
Model Number:
Serial Number:
Date of Install:
Battery Bank Information: (size, install date, battery type)
Product Packaging
Please safely store the packing the product was delivered in or recycle the packaging components as outlined below:
LDPE
Low Density
Polyetheylene
CFB
3
4
7
CFB
3
4
7
CFB
3
4
7
CFB
3
4
7
CFB
3
4
7
Corrugated berboard
main box
Plastic
foam protection
Plastic
accessories bag
www.earth911.com/recycling-center-search-guides
Local recycling centers can be found here:
Corrugated
Recycles
www.corrugated.org

Go Power GP-RVC-MPPT-30 Specifications

General

Battery Voltage Range	8V – 32V
Battery Type	Lead Acid (AGM, GEL, Flooded), LiFePO4
Max Charge Current	30A
Conversion Efficiency	≤98%
MPPT Tracking Efficiency	>99%
No-Load Loss	<10mA
Max Panel Input Voltage	100Voc
Max PV Power Input	600W@12V / 1200W@24V
Grounding	Negative
Protection	Solar/battery reverse polarity Solar/battery over voltage Solar/battery short circuit Over temperature
Operating Temperature	-35 to 45°C
Storage Temperature	-35 to 75°C
Humidity	95% N.C.
Water Ingress Protection	IP32
Altitude	< 3000m
Max Wire Gauge	8 AWG

Weight and Dimensions

Dimensions (H x W x D)	3.15” x 7.78” x 5.5”
Weight	3.14lbs (1.42kg)