[page 4] | gpelectric.com
1. SAFETY
Important safety information is contained throughout this manual that should be carefully observed and followed. This
information is presented using the following format:
The information is categorized in two ways:
Warning: Bodily harm could occur if instructions are not explicitly followed. If there are any doubts about the procedure or
conditions, please call GoPower! technical support before doing anything.
Caution: Damage to property could occur if instructions are not followed properly.
The following symbols are used to indicate the type of hazard
.
DISCONNECT ALL POWER SOURCES
Electricity can be very dangerous. Installation should be performed only by a licensed electrician or qualied
personnel.
BATTERY AND WIRING SAFETY
Observe all safety precautions of the battery manufacturer when handling or working around batteries. When
charging, batteries produce hydrogen gas, which is highly explosive.
WIRING CONNECTIONS
Ensure all connections are tight and secure.Loose connections may generate sparks and heat. Be sure to check
connections one week after installation to ensure they are still tight.
WORK PLACE SAFETY
Wear protective eyewear and appropriate clothing during installation. Use extreme caution when working with
electricity and when handling and working around batteries.
Warning / Caution: Result
Description of condition leading to result
SYMBOL MEANING SYMBOL MEANING
General Warning Hot Surface
Risk of Shock Risk of Fire
Risk of Electrocution Risk of Chemicals
Risk of Explosion Risk of Eye Injury
SYMBOL