6
User Manual V1.1-2022-11-15
03 Product Introduction
3 Product Introduction
3.1 Application Scenarios
3.2 Supported Grid Types
The inverter is a single-phase PV string grid-tied inverter, which converts the DC power
generated by the PV module into AC power for loads or the grid. The intended use of the
inverter is as follows:
Inverter Inverter Inverter Inverter
For the grid type with neutral wire, the N to ground voltage must be less than 10V.
PV String
Inverter
Circuit
Breaker
Circuit Breaker
(optional)
Utility
Grid
3.4 Appearance
3.4.1 Parts
No. Parts Description
1 DC Switch Start or stop DC input.
2 DC switch Locking Hole
[1]
Only for Australia. Turn the DC switch to OFF and
lock it to avoid electric shock when you have to work
on the inverter.
3 Reserved Port Reserved.
To Next Page
Loading...
Need help?
General
