ActionPossible causesProblem
Select a program with a high
temperature to dissolve grease
on very dirty dishes, such as In-
tensive 70°. Or run a self-clean-
ing program. See Self-clean in
the chapter Using the dishwash-
er.
Low temperature programs
have been selected for a pro-
longed period.
Grease deposits in the dish-
washer.
Activate the TotalDry setting.
See the chapter Settings.
The TotalDry setting has not
been activated.
The dishes are not dry enough.
Fully load the dishwasher.The dishwasher is not fully
loaded.
Top up with rinse aid or in-
crease the rinse aid dosage
setting.
Rinse aid needs topping up or
dosage is set too low.
Switch all-in-one detergents or
deactivate the TAB setting and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings.
The setting TAB is activated and
all-in-one detergent with insuffi-
cient drying effect is being used.
28