Gorenje GV643D60 User Manual

Before washing for the first time
Water hardness
In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral
content). Hard water leaves a white coating on dishes and the dishwasher.
Checking water hardness
Water hardness is specified using German degrees of water hardness (°dH), French degrees of water
hardness (°fH), English degrees of water hardness (°eH) or millimoles per litre (mmol/l).
A water supply with a water hardness in excess of 5°dH (9°fH / 6°eH / 0.9 mmol/ll) must be softened.
This is done automatically with the aid of the built-in water softener. In order for the water softener to
function properly, its settings must be adjusted to the hardness of the water supply. Once you have
adjusted the water softener settings, add detergent and rinse aid in doses suitable for soft water.
Contact the local waterworks to check the water hardness in your area.
Make a note of the water hardness:____________
Recommended settingmmol/l°eH°fH°dH
000.0-0.90-60-90-5
011.0-1.47-1010-146-8
021.5-2.011-1415-209-11
032.1-2.515-1821-2512-14
042.6-3.419-2426-3415-19
053.5-4.325-3035-4320-24
064.4-5.231-3644-5225-29
075.3-7.037-4953-7030-39
087.1-8.850-6171-8840-49
098.9628950
If the water hardness exceeds 50°dH (89°fH / 62°eH / 8.9 mmol/l), we recommend connecting an
external water softener.
Increased consumption during regeneration
The dishwasher's built-in water softener is regularly regenerated to maintain its function. Regeneration
extends the dishwashing program and increases energy and water consumption. Just how often the
dishwasher's water softener is regenerated depends on the selected setting.
Example: If the Eco 55° program is run with a water hardness of 14°dH (25°fH / 18°eH / 2.5 mmol/l),
the water softener is regenerated at regular intervals (after 5 dishwashing cycles), energy consumption
increases by 0.015 kWh, and water consumption increases by 2.3 litres, while the program time is
extended by 3 minutes. Regeneration takes place during the program’s main wash.
WARNING!
Hard water leaves a white coating on dishes and inside the dishwasher. It is therefore important
that you select the right setting for the water softener! See Water hardness in the chapter Settings.
Never run the dishwasher with an empty salt compartment if the water supply has a water
hardness in excess of 5°dH (9°fH / 6°eH / 0.9 mmol/l).
7

Gorenje GV643D60 Specifications

General

Control type	Touch
Product size	Full size (60 cm)
Tub material	Stainless steel
Built-in display	Yes
Number of baskets	3 basket(s)
Custom panel-ready	-
Appliance placement	Fully built-in
AC input voltage	220-240 V
Energy efficiency scale	A to G
Water consumption per cycle	11 L
Energy consumption per cycle	0.85 kWh
Cycle time	175 min
Noise level	44 dB
Delay start (max)	24 h
Dishwashing programs	60min, Auto, Eco, Hygiene, Intensive
Number of place settings	16 place settings
Number of washing programs	6
Maximum hot water supply temperature	40 °C
Package depth	665 mm
Package width	640 mm
Package height	880 mm
Package weight	33500 g

Weight and Dimensions

Depth	555 mm
Width	598 mm
Height	816 mm
Weight	31500 g
Installation compartment width	600 mm
Installation compartment height (min)	820 mm