15
4. Tighten one axle nut part way
then tighten the other nut, repeat
until both sides are tightened
securely. Be sure that the wheel is
centered between the fork legs.
2.
Position the front wheel so it’s
centered between the front fork
legs with the axle resting inside the
fork drop outs.
3. Align the disc brake rotor so it is
centered in the slot of the brake
caliper.
1. Remove packing block from disc
brake caliper
– Do Not Throw Away
– Re-install Packing Block whenever
you remove your front wheel.
CAUTION
Tighten nuts securely to the fork drop outs
3. FRONT WHEEL &
FRONT BRAKE
YOUR BIKE HAS A BOLT ON MECHANISM
14
To Next Page
Loading...
Need help?
General
