Pre-Ride Preparation
1. Please read this manual to understand the performance and related
requirements of the product.
2. Check the condition of the whole vehicle: carefully check the brake, tire,
handlebar, folding buckle and quick release parts of the power folding vehicle.
3. Check the circuit system: whether the battery is enough to support the required
range. If the battery power is insucient, you must rst charge it.
4. Check the brake system: Whether the brake and the brake power-o function are
normal. If brake power-o function fails please suspend the use and contact our
customer service in time.
5. Insert the riser at a depth not less than the minimum depth (with the safety
line as the minimum depth) and lock the quick lock. (see gure below)
6. The height of saddle tube can be adjusted according to personal preference, but
the insertion depth shall not be lower than the minimum insertion depth (take the
safety line as the minimum depth) to ensure safety and lock the quick lock. (see
gure below)
1 2
To Next Page
Loading...
Need help?
General
