Repair and Maintenance
1. The front and rear wheels of the vehicle should be located in the center of the front
fork or frame, and the expansion force of each spoke of the wheel rim should be
similar. Keep the wheel rim in a regular circle, without run out or oset connection.
If there are missing or broken spokes, it will make the rim less smooth. Find a
professional technician for debugging.
2. The rim must be smooth. If it is not smooth, it will increase the riding resistance or
cause danger.
3. Your folding car is equipped with high-quality drive chain, so please keep the chain
clean and add it frequently. Use clean oil for continuous lubrication.
4. Please check whether the brake pads are worn before each ride to ensure the
safety during the ride.
5. Please avoid riding in wet or snowy weather. If it is unavoidable remember to brake.
6. Check the tires frequently for any scar, crack or excessive wear. The inner tube
and air nozzle should be perpendicular to the rim. It can be crooked. Damaged or
excessively worn tires need to be replaced immediately. Please nd a professional
technician to replace your tire. If your tire accidentally punctures and leaks, please
contact a professional technician to repair or replace it.
To Next Page
Need help?
General
