LF1031-INS-LAB-RevD12
7
4 HANDLING PROCEDURES
SHIPPING AND TRANSPORTATION INSTRUCTIONS
If the patient lift is to be reshipped by common carrier, it should be packed in the same carton/s
in which it was received (the LF1031 is shipped in one carton; the LF1041 motor may be packaged
separately from the frame).
Unpacking
1. Check for any obvious damage to the carton or its contents. If damage is evident, notify the
carrier or your authorized Lumex Dealer.
2. Remove all loose packing from the carton.
3. Carefully remove all the components from the carton.
Info: Unless the patient lift is to be used immediately, retain boxes, containers and packing
material for use in storing until use of patient lift is required.
Inspection
1. Examine the exterior of the patient lift for nicks, dents, scratches or other damage.
2. Inspect all components.
Storage
1. Store the repackaged patient lift in a dry area.
2. DO NOT place other objects on top of the repackaged patient lift.
To Next Page
Loading...
Need help?
General