Gravely 991262 User Manual

EN - 20
3. Release parking brake and push unit to
desired location.
4. Engage parking brake.
5. Return transaxle bypass levers to
operating position. See Figure 24.
TRANSPORT UNIT
1. Push deck lift pedal completely forward to
engage transport lock. Release pedal.
2. Move unit to transport vehicle.
3. Stop engine, engage parking brake and
remove key from ignition.
4. Secure mower frame to transport vehicle.
NOTICE: NEVER secure unit to vehicle from
rods or linkages that could be damaged.
RELEASE TRANSPORT LOCK
1. Push deck lift pedal forward and lift
transport lock release lever.
2. Slowly return mower lift pedal to resting
position.
Your Gravely dealer can provide service and
adjustments to keep your unit operating at
peak efficiency.
Contact an authorized engine manufacturer’s
service center for engine service.
MAINTENANCE SCHEDULE
Figure 23
Figure 24
MAINTENANCE
WARNING: AVOID INJURY.
Read and understand the
Safety section before
proceeding.
Service Performed
Each Use Every 25 hrs. Every 50 hrs. Every 100 hrs. Every 400 hrs.
Clean Engine of Any Grass
or Debris
•
Clean Mower Deck of Any
Grass or Debris
•
Check Safety Interlock
System
•
Check Hydraulic System •
Check Parking Brake •
Check Engine Oil * •
Change Engine Oil *
Check Tire Pressure •
Check Mower Blades •
Check Battery •
Clean Battery •
Check Air Filter * •
Check Fasteners •
Lubricate Unit •
Clean Engine Cooling
System*
•
Check Belts •
Change Hydraulic Oil and
Filter **
•
* Refer to engine manual for instructions
** Change after first 75 hours of operation.

Gravely 991262 Specifications

General

Brand	Gravely
Model	991262
Category	Lawn Mower
Language	English