EasyManua.ls Logo

Gravely 991262 - TROUBLESHOOTING; Engine Starting and Running Problems; Drive System and PTO Malfunctions

Gravely 991262
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 27
TROUBLESHOOTING
Problem Probable Cause Correction
Engine does
not start.
Safety Interlock System is not
engaged or is faulty.
Check Safety Interlock System. See
Check Safety Interlock System on
page 22.
Fuel tank is empty. Fill fuel tank. See Before Operating Unit
on page 17.
Fuel supply is contaminated. Replace with clean fuel.
Battery is discharged. Charge battery. Refer to your unit’s
Service Manual.
Connection between battery and
battery cables is poor.
Tighten and/or clean battery and battery
cables. See Clean Battery on page 23.
Spark plug wire(s) are loose or
spark plug(s) are faulty.
Connect spark plug wire(s) or replace
spark plug(s). Refer to engine manual.
Electrical system is faulty. Contact your Gravely dealer.
Engine is faulty. Contact your Gravely dealer.
Engine runs
rough.
Choke control knob is in on
position. (Models 991240,
991242, 991244, 991246,
991254, 991256, 991258,
991260, 991262, 991264)
Move knob to off position.
Air filter cartridge is plugged. Clean or replace air filter cartridge. Refer
to engine manual.
Engine is faulty. Contact your Gravely dealer.
Engine
overheats.
Engine oil level is low. Add engine oil. Refer to engine manual.
Cooling fins are plugged. Clean engine. Refer to engine manual.
Engine is faulty. Contact your Gravely dealer.
Unit does not
drive.
The transaxles are bypassed. Engage levers. See Move Unit Manually
on page 19.
Transaxle drive belt is faulty. Contact your Gravely dealer.
Transaxles are faulty. Contact your Gravely dealer.
PTO
malfunctions.
Operator presence switch is not
engaged.
Activate switch by sitting on operator
seat.
Operator presence switch is
faulty.
Contact your Gravely dealer.
PTO belt is faulty. Replace belt. Refer to your unit’s Service
Manual.
PTO switch, wiring, connectors
or clutch are faulty.
Contact your Gravely dealer.
Unit moves
with engine off
and parking
brake engaged.
Parking brake needs adjustment. Adjust parking brake lever. Refer to your
unit’s Service Manual.
Parking brake is faulty. Contact your Gravely dealer.
Unit does not
drive straight.
Tire pressure is incorrect. Check tire pressure. See Specifications
on page 32.
Steering levers need adjustment. See Adjust Steering Levers on page 25.

Related product manuals