12 1/00
Hardware
Keep nuts and bolts, especially blade attachment bolts,
tight and keep equipment in safe operating condition.
Inspect blades before use for excess wear or damage.
Keep hardware, especially blade attachment bolts, tight.
Stop Engine
Before maintenance, adjustments or service (except
where specifically recommended) shut off engine and
remove ignition key.
Cool Engine
Allow hot parts to cool.
Cleaning
Keep unit free of grass, leaves or other debris. Clean up
oil or fuel spills.
Lower cutting deck when unit is parked or stored unless a
positive mechanical lock is used.
Replacement Parts
Keep all parts in good working condition. Replace worn
or damaged parts only with Gravely recommended
service parts.
ATTACHMENT AND ACCESSORY SAFETY
Use only attachments or accessories designed for your
unit.
To Next Page
Loading...
Need help?
General
