6
1/00
THE MANUAL
Before operation of unit, carefully and completely read
your manuals. The contents will provide you with an
understanding of safety instructions and controls during
normal operation and maintenance.
All reference to left, right, front, or rear are given from
operator sitting in the operation position and facing the
direction of forward travel.
SERVICE AND
REPLACEMENT PARTS
When ordering publications, replacement
parts, or making service inquiries, know
the Model and Serial numbers of your
unit and engine.
Numbers are located on the product
registration form in the unit literature
package. They are printed on a serial
number label, located on the frame of
your unit (Figure 2).
• Record Unit Model and Serial numbers here.
• Record Engine Model and Serial numbers here.
PRODUCT REGISTRATION
A warranty card must be filled out, signed, and returned at
time of purchase. This card activates the warranty. Claims
meeting requirements during limited warranty period will
be honored. Return your registration card to assure
warranty service.
UNAUTHORIZED REPLACEMENT PARTS
Use only Gravely replacement parts. The replacement of
any part on this equipment with anything other than a
Gravely authorized replacement part may adversely affect
the performance, durability, and safety of this unit and may
void the warranty. Gravely disclaims liability for any claims
or damages, whether regarding warranty, property
damage, personal injury or death arising out of the use of
unauthorized replacement parts.
DISCLAIMER
Gravely reserves the right to discontinue, change, and
improve its products at any time without public notice or
obligation to the purchaser. The descriptions and
specifications contained in this manual were in effect at
printing. Equipment described within this manual may be
optional. Some illustrations may not be applicable to your
unit.
DEALER DELIVERY
Dealer should:
1. Test brakes (See Operation Section) after tractor is
assembled to be sure adjustment has not been
disturbed in shipment (See Adjustment Section).
Wheel brakes are properly adjusted at factory.
2. Check the safety interlock system to make sure that it
is functioning properly. With operator on seat, unit
must not start unless Speed Selector is in neutral (N)
and Implement Power disengaged (Off). Engine must
stop if operator leaves seat when Speed Selector is
in any drive position or with Implement Power
engaged (On). Refer to Adjustment Section.
3. Fill out Original Purchaser Registration Card and
return the card to Gravely.
4. Explain Gravely Limited Warranty Policy.
5. Explain recommended lubrication and maintenance.
Advise customer on adjustments.Instruct customer
on controls and operation of unit. Discuss and
emphasize the Safety Precautions.
Give customer Owner/Operator, Parts, and Engine
Manuals. Advise customer to thoroughly read and
understand them.
Customer Note:
Your Dealer has been provided
complete setup and preparation instructions which must
be completed prior to you taking delivery of this unit. The
dealer is required to review important information in this
manual with you before or upon delivery of the unit or
attachment.
Transfer
model & serial
number
label from
product
registration
here.
Figure 2
Serial Number Label
OC0191
SECTION 1: INTRODUCTION
To Next Page
Loading...
Need help?
General
