EasyManuals Logo

Gravely ZT X 52 User Manual

Gravely ZT X 52
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
EN - 21
CHECK TIRE PRESSURE
See Specifications on page 37 for
recommended tire pressure.
CHECK CARBON CANISTER
FILTER
Models 915176, 915236, 915238, 915240,
915242
See Figure 13.
Clean or replace filter whenever engine air
filter is cleaned or replaced.
CHECK FASTENERS
Check for loose or missing hardware.
LUBRICATE UNIT
See Figure 14.
1. Place unit in service position. See
Service Position on page 20.
2. Apply grease to seat tracks through slots
under seat plate.
3. Return seat to operating position and
slide seat back and forth to spread
grease along tracks.
WARNING: AVOID INJURY.
Explosive separation of tire
and rim parts is possible.
DO NOT inflate tires above
the recommended pressure.
DO NOT inflate tires with a
compressor; use a hand
pump.
DO NOT stand in front of
tire assembly when
inflating. Use a clip-on
chuck and extension hose
long enough to allow you to
stand to one side.
DO NOT mount a tire
without proper equipment
and experience.
Figure 13
1
1. Carbon Canister Filter
Figure 14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gravely ZT X 52 and is the answer not in the manual?

Gravely ZT X 52 Specifications

General IconGeneral
Engine ManufacturerKawasaki
Horsepower23 HP
Cutting Width52 inches
Fuel Capacity3.5 gallons
Deck Material10-gauge steel
Spindle MaterialAluminum
Warranty3 years
Cutting Height1.5 - 4.5 inches

Related product manuals