26
Energy-Recovery Ventilation
System Service Manual
3 WIRING DIADRAM
([WHUQDOZLULQJ¿JXUHRIWKHXQLW,IWKLVRQHLVGLIIHUHQWIURPZLULQJ¿JXUHRIMXQFWLRQER[WDNHWKHZLULQJER[
of junction box as standard) .
1) Model:FHBQ-D3.5-K;FHBQ-D5-K;FHBQ-D8-K;FHBQ-D10-K.
Note:
1.When need humidifier,connect "1" and "2" terminal (220Vˈ1A) to the contactor
coil of the humidifier.Meanwhile,connect the humidification sensor to HUMIDITY terminal
on the main board.
2.Wire the CN9 on the main board to the united control to access a center control to the air
valves.
3.The part with broken line is optional for user.
Remote
Control
Wired
controller
POWER
PE
L
N
Humidity
sensor
United
control
Humidifier
AC Contactor Coil
2) Model:FHBQ-D15-M;FHBQ-D20-M.
Humidity
sensor
United
control
Note:
1.When need humidifier,connect "1" and "2" terminal (220Vˈ1A) to the contactor
coil of the humidifier.Meanwhile,connect the humidification sensor to HUMIDITY terminal
on the main board.
2.Wire the CN9 on the main board to the united control to access a center control to the air
valves.
3.The part with broken line is optional for user.
Remote
Control
Wired
controller
POWER
PE
L1
L2
L3
N
Humidifier
AC Contactor Coil