5
Operation Method
Basic Functions of the Buttons
Notes:
●
Do not remove the water tank while unit is
●
Water tank must be correctly installed for operation.
in operation.
● If you want to use drain hose to drain water away, please install the hose acc-
ording to section "Drainage method".
●
Each time pressing the function button on the control panel will give out a
"beep" sound.
● When power is connected, power indicator on the control panel will be on and
1
ON/OFF Button
3
Timer Button
Press Timer button to set timer on or off. The timer can be set in 1h
increment among 0-24h with each press of Timer button. If hold the Timer
button, time will increase rapidly circularly. After timer is set, time will be
displayed for 5s and timer indicator will be on.
Press Fan button can set high, medium or low fan speed. When the
corresponding indicator is on, it indicates the set fan speed.
2
Fan Button
Speed Indicator
Timer Indicator
Filter Cleaning
Indicator
Dehumidify Mode
Indicator
Water Tank Full
Indicator
Display Window
Wind Direction Indicator
1
2
3
4
56
To Next Page
Loading...
Need help?
General
