Multi Variable Air Conditioners Console Type Indoor Unit
20
(4) Reinstall the cover (as shown in Fig 2
④
).
Fig.1 Fig.2
NOTES!
①
The remote controller should be placed 1m away from the TV set or stereo sound sets.
②
The operation of remote controller should be performed within its receiving range.
③
If the remote controller does not operate normally, please take the batteries out and reinsert
them after 30 seconds. If it still can't operate properly, replace the batteries.
④
When replacing the batteries, do not use old or different types of batteries, otherwise, it may
cause malfunction.
⑤
When you won’t use the remote controller for a long time, please take out the batteries.
6 Maintenance Method
Before inspection and maintenance of the unit. PLEASE set power switch to “OFF” to cut off the
power supply.
6.1 Units
Indoor unit, Outdoor unit and Remote Controller Wipe them with dry soft cloth.
6.2 Front Panel
(1) Open the front panel.
(2) Remove the air filter.
Slide the two stoppers on the left and right sides inward until they click.
(3) Remove the front panel.
1) Remove the string.
2) Allowing the front panel to fall forward will enable you to remove it.
(4) Clean the front panel.
1) Wipe it with a soft cloth soaked in water.
2) Only neutral detergent may be used.
3) In case of washing the front panel with water, dry it with cloth, dry it up in the shade after
washing.
(5) Attach the front panel.
1) Insert the front panel into the grooves of the unit (3 places).
2) Attach the string to the right, inner-side of the front grille.
3) Close the panel slowly.
To Next Page
Loading...
Need help?
General
