7
Using the remote control
How to use the remote control
• Make sure nothing, such as curtains, blocks the
•
The signal effective distance is 8m.
• Do not expose the receiver window to direct sunlight.
• Use of certain fluorescent lamp in the same room
• Do not leave the remote control in direct sunlight
signal receiver window.
This may adversely affect its operation.
may interfere with transmission of the signal.
or near a heater. Protect the remote control from
moisture and shock.
When attached, to remove the remote control from
the unit, lift the remote control up slightly and pull it
Remote control hook
out.
To prevent the remote control from being
misplaced, hook it to the unit when not in
use.
CAUTION:
This is a general purpose remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
Point the remote control towards the Signal receiver
and press the desired button. The unit generates
a beep when it receives the signal.
To Next Page
Loading...
Need help?
General
