76
Maintenance
Service Manual
Step
Procedure
28. Remove compressor and its ttings
27.Remove Motor Sub-assy(Flutter)
29.Remove castors
Remove 3 nuts with washer on the
compressor and its ttings and then
remove the compressor and its
ttings.
Remove 2 screws on the motor
sub-assy and then remove the
Motor Sub-assy(Flutter).
Remove 4 screws used for xing the
castors and then take out the castors.
Screws
Motor Sub-assy(Flutter)
compressor and its ttings
nuts
Screws
castors