Gree livo GEN 3 LIVV09HP230V1A User Manual

Remote Controller
Introduction for icons on display screen
12
MODE BUTTON
Use the “MODE” button to select one of the available modes.
The selected mode will be displayed on the remote controller and
the appropriate light will illuminate on the front display panel.
AUTO – Unit will automatically select heating or cooling to
maintain room temperature between 68°F and 77°F.
The remote controller will display the Auto Mode icon with
no setpoint.
COOL – To cool to selected setpoint and remove moisture. Press or to adjust
set temperature. System varies compressor speed to maintain desired temperature.
HEAT – To heat to selected room setpoint. Press or to adjust set temperature.
System varies compressor speed to maintain desired room temperature.
FAN ONLY – To circulate air without heating or cooling. Use Fan Speed button to select
speed from low to high.
DRY – Select DRY MODE to increase moisture removal during warm humid conditions.
In this mode, fan speed cannot be adjusted.
1. If the Room Temperature is more than 4°F above the set temperature, the
system will be operating in cooling mode with low fan speed.
2. If the Room Temperature is between 4°F higher than, and 4°F less than, the set
temperature, the system will cycle 6 minutes ON and 4 minutes OFF in cooling
mode. The indoor fan will be at low speed.
3. If the Room Temperature is more than 4°F below the set temperature, the system
will be OFF and the indoor fan will be at low speed.
: AUTO
: COOL
: DRY
:
FAN ONLY
: HEAT
Icons Displayed
OPERATION OF WIRELESS REMOTE CONTROLLER
TWD-1594 Livo+ owners printer.qxp_Layout 1 2/21/17 2:11 PM Page 21
9
1
2
3
4
1
3
5
2
MODE
FAN
5
4
6
SWING
TURBO
6
7
7
SLEEP
TEMP
9
8
WiF i
8
CLOCK
LIGHT
11
10
9
12
10
11
12
ON/OFF button
MODE button
FAN button
SWING button
TURBO button
▲
▲/ button
SLEEP button
TEMP button
WiFi button
LIGHT button
CLOCK button
TIMER ON / TIMER OFF
button
TIMER
ON
TIMER
OFF
WiFi
{
models have this function while some
I feel
Operation mode
Light
:Set temp.
:Outdoor ambient temp.
Set fan speed
do not. Please refer to the actual models.
Set time
Up & down swing
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Clock
Sleep mode
Send signal
Turbo mode
TIMER ON /
TIMER OFF
Child lock
8
℃
heating function
Set temperature
This is a general remote controller.Some
Temp. display type
:Indoor ambient temp.
OPERATION OF WIRELESS REMOTE CONTROLLER

Gree livo GEN 3 LIVV09HP230V1A Specifications

General

Brand	Gree
Model	livo GEN 3 LIVV09HP230V1A
Category	Air Conditioner
Language	English