(sold separately)
7. Inter-Connection Wire (sold separately)
8. Drain Hose (sold separately)
9. Refrigerant Lines (sold separately)
Outdoor unit
5
6
Air outlet
Air inlet
Air inlet
Air outlet
3
4
1
2
7
8
9
Use insulated object to press the Aux. button.
OPERATION OF WIRELESS REMOTE CONTROLLER
CHANGING BATTERIES AND ADDITIONAL NOTES
To change batteries, slide cover off battery compartment on back of remote controller. Remove
and safely discard old batteries. Insert two newAAA 1.5V dry batteries, using correct polarity.
Reattach back cover.
NOTE:
• If the remote controller will not be used for a long time, remove batteries to prevent
leakage damage.
• Be sure to aim the remote controller at the receiver of the main unit when operating.
• When remote emits a signal, icon will flicker; a tone will be heard when unit receives
that signal.
DAMAGED OR LOST REMOTE CONTROLLER
If remote controller is lost or damaged, the Livo system can be turned off directly from the in-
door unit. Lift the front panel of the indoor wall unit, then press the AUX button to turn on or
turn off. When the unit is on, it will operate in AUTO Mode.
Remove
old batteries
Install
new batteries
CHANGING BATTERIES
WARNING
Aux. Button
Panel
16
To Next Page
Loading...
Need help?
General
